*WARNING: UV decals are PERMANENT*

How to Apply Your UV Decal

1. Clean the surface
   Wipe the area with rubbing alcohol and let it dry completely. Surface must be smooth, clean, and dry.
2. Peel the backing
   Carefully peel the white backing off the decal, leaving the design on the clear transfer sheet.
3. Position your decal
   Place the decal exactly where you want it. Once it touches the surface, it sticks quickly.
4. Press & smooth
   Firmly rub the entire design with your fingers or a card, working from the center outward to remove air bubbles.
5. Remove transfer film
   Slowly peel off the clear top film at an angle. If any part lifts, press and rub again before continuing.
   

Tip: Works best on hard, smooth surfaces like glass, plastic, metal, and sealed wood.